manualshive.com logo in svg

Utax PF 420, Service Manual

Share
Download
Utax PF 420 Service Manual Download Page 7

Safety warnings and precautions

Various symbols are used to protect our service personnel and customers from physical danger and 
to prevent damage to their property. These symbols are described below:

DANGER:

 High risk of serious bodily injury or death may result from insufficient attention to or incorrect

compliance with warning messages using this symbol.

WARNING:

 Serious bodily injury or death may result from insufficient attention to or incorrect compliance

with warning messages using this symbol.

CAUTION:

 Bodily injury or damage to property may result from insufficient attention to or incorrect

compliance with warning messages using this symbol.

Symbols

The triangle (

) symbol indicates a warning including danger and caution. The specific point

of attention is shown inside the symbol.

General warning.

Warning of risk of electric shock.

Warning of high temperature.

indicates a prohibited action. The specific prohibition is shown inside the symbol.

General prohibited action.

Disassembly prohibited.

indicates that action is required. The specific action required is shown inside the symbol.

General action required.

Remove the power plug from the wall outlet.

Always ground the copier.

Summary of Contents for PF 420














































































Reviews:

No comments

Brands by name

Popular brands

Load more brands