manualshive.com logo in svg

Utax PF 420, Service Manual

Share
Download
Utax PF 420 Service Manual Download Page 49

3MH

1-4-4

(4)
A paper jam in the 
paper feed section is 
indicated during 
copying (misfeed in 
vertical paper con-
veying section 1).
Jam code 15

Broken registration switch, 
cassette feed switch 1 or 2 
actuator.

Check visually and replace switch.

Defective switch.

Run maintenance item U031 and turn switch on and off manually. 
Replace the switch if indication of the corresponding switch is not 
light.
Registration switch, cassette feed switch 1, 2 

Check if the paper feed 
clutch, cassette paper feed 
clutch 1, 2 or 3 malfunc-
tions.

Run maintenance item U032 and select the clutch to be turned on 
and off. Check the status and remedy if necessary.

Electrical problem with the 
paper feed clutch, cassette 
paper feed clutch 1, 2 or 3.

Check (see page 1-4-9).

Defective feed pulleys or 
feed rollers.

Check visually and replace.

(5)
A paper jam in the 
paper feed section is 
indicated during 
copying (misfeed in 
vertical paper con-
veying section 2).
Jam code 16

Broken cassette feed 
switch 1 or 2 actuator.

Check visually and replace switch.

Defective switch.

Run maintenance item U031 and turn switch on and off manually. 
Replace the switch if indication of the corresponding switch is not 
light.
Cassette feed switch 1, 2 

Check if the paper feed 
clutch, cassette paper feed 
clutch 1 or 2 malfunctions.

Run maintenance item U032 and select the clutch to be turned on 
and off. Check the status and remedy if necessary.

Electrical problem with the 
paper feed clutch, cassette 
paper feed clutch 1 or 2.

Check (see page 1-4-9).

Defective feed pulleys or 
feed rollers.

Check visually and replace.

(6)
A paper jam in the 
paper feed section is 
indicated during 
copying (multiple 
sheets in first paper 
feeder).
Jam code 22

Deformed guides along the 
paper conveying path.

Check visually and replace.

Broken registration switch 
actuator.

Check visually and replace switch.

Defective registration 
switch.

Run maintenance item U031 and turn registration switch on and 
off manually. Replace the switch if indication of the corresponding 
switch is not light.

Check if the cassette paper 
feed clutch 1 malfunctions.

Run maintenance item U032 and select the cassette paper feed 
clutch 1 to be turned on and off. Check the status and remedy if 
necessary.

Electrical problem with the 
cassette paper feed clutch 
1.

Check (see page 1-4-9).

Check if the right and left 
registration rollers contact 
each other.

Check visually and replace.

Problem

Causes/check procedures

Corrective measures

Summary of Contents for PF 420














































































Reviews:

No comments

Brands by name

Popular brands

Load more brands