Utax PF 420 Service Manual Download Page 38

Page: 38 / 77

3MH

1-3-15

(3) Contents of maintenance mode items

Maintenance

item No.

Description

U019

Displaying the ROM version
Description

Displays the part number of the ROM fitted to each PWB.

Purpose

To check the part number or to decide, if the newest version of ROM is installed.

Method

1. Press the start key. The ROM version are displayed.
2. Change the screen using the cursor up/down keys.

Completion

Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.

U030

Checking motor operation
Description

Drives each motor.

Purpose

To check the operation of each motor.

Method

1. Press the start key.
2. Select the motor to be operated using the cursor up/down keys.
3. Press the start key. The operation starts.

4. To stop operation, press the stop/clear key.

Completion

Press the stop/clear key after operation stops. The screen for selecting a maintenance item No. is displayed.

Display

Description

MAIN

Main ROM

ENGINE

Engine ROM

LANG(St)

Standard language ROM

LANG(Op)

Optional language ROM

MAIN BOOT

Boot of main ROM

PRINTER

Printer ROM

NWS

Optional network scanner ROM

Optional DP ROM

FINISHER

Optional built-in finisher ROM

CASS2

First paper feeder ROM (standard for 22 ppm model)

CASS3

Second paper feeder ROM

CASS4

Third paper feeder ROM

Display

Operation

MAIN

Drive motor (DM) is turned ON

DRUM

Drum motor (DRM) is turned ON

Cassette drive motor 1 (CDM1) is turned ON

Cassette drive motor 2 (CDM2) is turned ON

Cassette drive motor 3 (CDM3) is turned ON

EJE1

Eject motor (EM) is turned ON (forward)

EJE2

Eject motor (EM) is turned ON (reverse)

Summary of Contents for PF 420














































































Search results

Summary of Contents for PF 420

Reviews:

Brands by name

Popular brands

Utax PF 420, Service Manual

Search results

Summary of Contents for PF 420

Reviews:

Brands by name

Popular brands