Utax PF 420 Service Manual Download Page 27

Page: 27 / 77

3MH

1-3-4

U030

Checking motor operation
Description

Drives each motor.

Purpose

To check the operation of each motor.

Method

1. Press the start key.
2. Select the motor to be operated using the exposure adjustment keys.

3. Press the start key. The selected motor operates.
4. To stop operation, press the stop/reset key.

Completion

Press the stop/clear key after operation stops. The screen for selecting a maintenance item No. is displayed.

U031

Checking switches for paper conveying
Description

Displays the on-off status of each paper detection switch on the paper path.

Purpose

To check if the switches for paper conveying operate correctly.

Method

1. Press the start key.
2. Turn each switch on and off manually to check the status. When the on-status of a switch is detected,

the original size indicator corresponding to the operated switch lights.

Completion

Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.

Maintenance

item No.

Description

Display

Motor

Drive motor (DM) is turned ON

Drum motor (DRM) is turned ON

Cassette drive motor 1 (CDM1) is turned ON

Cassette drive motor 2 (CDM2) is turned ON

Cassette drive motor 3 (CDM3) is turned ON

EJ1

Eject motor (EM) forward rotation is turned ON

EJ2

Eject motor (EM) reverse rotation is turned ON

Original size indicator

Switch

A3R/Ledger

Eject switch (ESW)

A4R/Legal

Registration switch (RSW)

A5R/Legal

Cassette feed switch 1 (CFSW1)

A4/Letter-R

Cassette feed switch 2 (CFSW2)

B4R/Letter

Feedshift switch (FSSW)

B5R/Statement

Duplex paper conveying switch (DUPPCSW) (option)

Summary of Contents for PF 420














































































Search results

Summary of Contents for PF 420

Reviews:

Brands by name

Popular brands

Utax PF 420, Service Manual

Search results

Summary of Contents for PF 420

Reviews:

Brands by name

Popular brands