Utax P-C2660 MFP, User Manual, Page: 445 / 578

Default Setting (System Menu)
8-189
8
9
Press the  or  key to select [HTTP/HTTPS] or
[HTTPS only].
10
Press the OK key. Completed. is displayed and the
screen returns to the Secure Protocol menu.
LDAP Security
Select the communication protocol according to the type of security employed by the LDAP server. The default
setting is
Off .
The table below shows the available settings.
* You can change the port number using Embedded Web Server RX.
Use the procedure below to make the setting.
1
In the Sys. Menu/Count. menu, press the  or 
key to select [System/Network], and press the OK
key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the
Right
Select key).
2
The System/Network menu appears.
3
Press the

or

key to select [Network Setting].
Item Description
Off Do not use security employed by the LDAP server.
SSL/TLS Encryption is applied any data communication. To enable LDAP security, the
LDAP port may have to be changed according to the server settings.
Typically, 636* for SSL/TLS is well-known LDAP port.
STARTTLS Encryption is applied any data communication. Typically, 389* for
STARTTLS is well-known LDAP port.
Sys. Menu/Count.:
a b
1
Report
2 Counter
*********************
[ Exit ]
3 System/Network
Login User Name:
L b
*******************
Login Password:
[ Login ]
System/Network:
a b
*********************
2 Optional Network
3
NW InterfaceSend
[ Exit ]
1 Network Setting