Utax P-C2660 MFP User Manual Download Page 136

Page: 136 / 578

Basic Operation

3-26

Enter the destination e-mail address.

NOTE:

Destination can be specified using the

Address Book or the One-touch keys. Refer to
Specifying Destination on page 3-41.

Press the

key.

Completed.

is displayed and the

screen returns to the basic screen.

NOTE:

If the screen for confirming the entry of a new

destination (

page 8-77

) is set to [On], a screen to

confirm the entered e-mail address appears. Enter the
same e-mail address again and press the

key.

If there are additional destinations, press the

Confirm/Add Destination

key. Repeat steps 2 to

5 to enter additional destinations. Up to 100
destinations can be specified.

Press [Exit] (the

Right Select

key) to return to the

basic screen.

Press the

Confirm/Add Destination

key to

confirm or delete the registered destinations.
Press the





key to select a destination and

press the

key. Then, you can edit or delete the

destination.

Press [Exit] (the

Right Select

key) to return to the

basic screen.

Press the

Start

key. Transmission starts.

NOTE:

If the screen for confirming the destination

before transmission (

page 8-77

) is set to [On], the

Confirm Destination screen appears when the

Start

key is pressed. For more information, refer to Confirm
Destination Screen on page 3-40.

Ready to send.

Dest.: 1

:sally@###########

1-sided 300x300dpi
[ Duplex ] [ScanRes.]

Dest. Confirm.:

*********************

aaaaaaaaa@########

bbbbbbbbb@########

[

Add

] [ Exit

]

Morgan@###########

Summary of Contents for P-C2660 MFP



































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for P-C2660 MFP

Reviews:

Utax P-C2660 MFP, User Manual, Page: 136 / 578

Search results

Summary of Contents for P-C2660 MFP

Reviews: