Utax CLP 3630 Instruction Handbook Manual Download Page 34

Page: 34 / 78

2-10

Printing Operation

Printing a Network Interface Status Page

You can print out a status page for the network interface. The network
status page shows the network addresses, and other information under
various network protocols about the network interface.

Adjust/Maintenance

Adjust/Maintenance is used to adjust the print quality and to carry out
printer maintenance.

The options available in Adjust/Maintenance are as follows:

• Color Calibration
• Registration Normal
• Registration Details
• Restart Printer
• Service

IMPORTANT

Service

is primarily a menu used by service

personnel for maintenance work. There is no need for customers to
use this menu.

Press

[MENU]

Press

repeatedly until

Adjust/Maintenance >

appears.

Press

while

Adjust/Maintenance >

is displayed.

Press

repeatedly until

>Service >

appears.

Press

repeatedly until

>>Print Network Status Page

appears.

Press

[OK]

. A question mark (

) appears.

Press

[OK]

Processing

appears and a status page is printed out.

When printing ends, the display returns to

Ready

Adjust/ >
Maintenance

>>Print Network
Status Page ?

Summary of Contents for CLP 3630















































































Search results

Summary of Contents for CLP 3630

Reviews:

Related manuals for CLP 3630

Brands by name

Popular brands

Utax CLP 3630, Instruction Handbook Manual

Search results

Summary of Contents for CLP 3630

Reviews:

Related manuals for CLP 3630

Brands by name

Popular brands