UTAH SCIENTIFIC UTAH-100/UDS 10x10, System Setup And Operation

Page: 5 / 131

v
Section 1
Important Safeguards and Notices
This section provides important safety guidelines for the Operator and Service
Personnel. Specific warnings and cautions are found throughout the guide where they
apply, but may not appear here. Please read and follow the important safety
information, specifically those instructions related to risk of fire, electric shock, or
injury to persons.
Safety Symbols
•
Hazardous Voltage symbol
•
Caution symbol. The product is marked with this symbol
when it is necessary to refer to the manual to prevent damage
to the product.
Warnings
Please observe the following important warnings:
•
Any instructions in this guide that require opening the chas-
sis, changing a power supply, or removing a board, should be
performed by qualified personnel only. To reduce the risk of
electric shock, do not perform any service unless you are
qualified to do so.
•
Heed all warnings on the unit and in the operating instruc-
tions.
•
Do not use this product in or near water. Disconnect AC
power before installing any options or servicing the unit
unless instructed to do so by this manual.
•
This product is grounded through the power cord ground con-
ductor. To avoid electric shock, plug the power cord into a
properly wired receptacle before connecting the product
inputs or outputs.
•
Route power cords and other cables so they won’t be dam-
aged.
•
The AC receptacle (socket) should be located near the equip-
ment and be easily accessible.
•
Disconnect power before cleaning. Do not use any liquid or
aerosol cleaner - use only a damp cloth.