followed by one
(1)
wheel and one (1)
3/8" flat
washer.
3.
Secure the wheel to the axle with one
(1) acorn nut. Repeat this step to attach
the second fixed wheel to the opposite end of the axle.
4. Assemble the pedestal using the provided six (1/4" - 20 x 3/4" bolts and six (6)
1/4" flat washers. Fasten the bolts to the threaded inserts.
5. Assemble the pedestal to the base using six (6) 1/4" - 20 x 3/4" bolts and six (6)
1/4" flat washers.
6. Tighten all fasteners
Assembly Instructions
Parts List
Description
Qty
Pedestal, Right Side
1
Pedestal, Left Side
1
Pedestal, Center
1
Base
1
Caster Wheel
2
Fixed Wheel
2
1/4-20 Bolt x 3/4”
22
Acorn Nut
2
1/4” - 20 X 1/2” Bolt
8
Side Table
1
1/4” Flat Washer
30
1/4” Lock Washer
8
3/8
”
Flat
Washer
4
-6-
TOOLS AND MATERIALS NEEDED FOR INSTALLATION
You will need
one (1)
#3 phillip screw driver for assembly
and on
e (1) 5/8” socket/
wrench to install wheels.
Use proper assembly technique
. W
hen installing bolts
,
start all bolts first and then
tighten
sufficiently
.
STEP 1
-
BASE AND PEDESTAL ASSEMBLY
1.
Attach the swivel wheels to base using four (4) 1/4”-20 x 1/2” bolts
,
four (4)
1/4"
lock
washers, and four (4)
1/4"
flat washers on each wheel.
2.
To attach the fixed wheels to the axl
e
, slide on two (2)
3/8" flat
washers
,
Pedestal and Base Assembly
Wheel Installation
WARNING: Never leave the
grill
unattended while operating.
Disconnect the
grill
from its power source when not in use.
UNPACKING:
1.
Remove the grill from the carton.
2.
Remove all packing materials applied for shipping.
3.
Remove and hold all parts and hardware.
4.
Inspect for damage. Promptly inform USSC Grills
at (423)750-2723
of damaged or missing parts
.
change image to show assy sequence:
Nut, washer, wheel, washer (1), axle