Low Power WiFi Module User Manual V1.3
http://www.tcp232.net
Jinan USR IOT Technology Limited.
Page 30 of 59
3.2.3. Default Parameter Setting
Default SSID: HF-LPB;
Deault security mode: open,none;
User UART parameter setting:115200,8,1,None;
Default network parameter setting:TCP,Server,8899,10.10.100.254;
Module IP address: dhcp,0.0.0.0,0.0.0.0,0.0.0.0;
3.2.4. Module Debug
PC1 open “CommTools” program, setting the same serial port parameters with USR-WIFI232-G
module and open serial port connection.
Figure 24.“CommTools” Serial Debug Tools
PC2 open “TCPUDPDbg” program, and create a new connection. If USR-WIFI232-G configured as
Server mode, “TCPUDPDbg” Tools shall create “Client “mode connection. Or otherwise, create a
“Server” mode connection.
Figure 25. “TCPUDPDbg” Tools Create Connection
Then setting the TCP/UDP connection parameters. Default as following:
