Operating Instructions: Interlock Blocking -
A
L
PHA
Description
Unique Safety Products ALPHA
is an Interlock Blocking
device designed to provide additional safeguarding to
prevent operators being trapped inside a safeguarded
space in machine guarding applications where whole body
access is required. The
ALPHA
works in conjunction with
existing interlocking to prevent the unexpected reset or
restart of the safety-related circuit. It works by forcing the
removal of a personnel or safety key before the guard can
be fully opened and preventing the guard from fully closing
until the key is returned. Thus, while the key is with the
operator inside the area, the interlock is blocked from
allowing the machine to be reset or restarted. Additional
padlock points allow for each individual entering the area to
apply their own means of control to the device.
As a purely mechanical component complete with an
integrated mounting plate it is easily retrofitted or added to
an existing system, regardless of interlock type, without the
need for wiring or programming.
Options & Ordering Information
Description
Part No.
ALPHA
suitable for Left hand facing Hinged Doors
ALP
2H-1-1-CLSS-MP1
ALPHA
suitable for Right hand facing Hinged Doors
A
L
P
4H-1-1-CLSS-MP1
ALPHA
suitable for Left hand facing Sliding Doors
A
L
P
2S-1-1-CLSS-MP1
ALPHA
suitable for Right hand facing Sliding Doors
A
L
P
4S-1-1-CLSS-MP1
NOTICE!
The ALPHA
is not an interlock and must only be used in addition to an interlock as part of a safety related part of a control
system that meets required reliability.
The
ALPHA
cannot be used in conjunction with an Interlock that includes an Escape Release or Internal facing
handle.
Important:
The
ALPHA
Interlock Blocking Device is designed for use according to the installation and operating instructions enclosed. It
must be installed by competent and qualified personnel who have read and understood the whole of this document prior to
commencing installation.
If the Device or guarded machinery equipment is used in a manner not specified by the manufacturer, the protection provided
by the equipment may be impaired.
Any modification to or deviation from these instructions invalidates all warranties.
Unique Safety Products and
Fortress Interlocks Ltd accept no liability whatsoever for any situation arising from misuse or
misapplication of the Device.
The
ALPHA
alone is not an Interlock and must only be used in addition to an Interlock as
part of a complete machine guarding system. The paired Interlock device must meet all relevant safety requirements
and applicable safety standards.
BEWARE OF INTENTIONAL MISUSE CAUSED BY OPERATORS WANTING TO BYPASS SAFETY SYSTEMS. THE
INSTALLER SHOULD ASSESS THE RISKS AND MITIGATE AGAINST THEM.
The installation and operation of the
ALPHA
and the complete machine guarding system must take into account the
requirements of ISO 14119:2013, in particular Section 7 - Design for minimising defeat possibilities.
In order to maintain device safety rating, overall machine guarding system must be validated to EN ISO 13849-2 and/or
evaluated in accordance with IEC 62061.
IF YOU HAVE ANY QUESTIONS OR QUERIES OF ANY NATURE WHATSOEVER PLEASE CONTACT THE SUPPLIER
WHO WILL BE PLEASED TO ADVISE AND ASSIST.
ALPHA
-H
ALPHA
-S
Unique Safety Products | www.uniquesafetyproducts.com | [email protected]
