MOWOOT II
usMIMA S.L.
User Manual
Version 10
Page. 8/20
Component
Illustration
DC Power Adapter;
For indoor use only. Receives 100-240
VAC, 50-60 Hz and supplies 12 VDC 3A to the console. Use
only the DC power adapter provided with the MOWOOT II.
2.2 Exoperistaltic Abdominal Belt
Is fastened around the area to be treated. Approx. height 110 mm. contains 4 actuators that fill up
sequentially with air from the console completing 1 cycle. The cycles will be repeated until the
treatment session is complete. It stops automatically once the treatment is finished.
The belt is connected to the console by four tubes connected to a plug, the plug must be placed with
the logo facing up.
Small Size (S):
Cyan border, perimeter 650-850 mm.
Medium Size (M):
Green border, perimeter 800-1000 mm.
Large Size (L):
Grey border, perimeter 950-1150 mm.
Extra Large Size (XL):
Black border, perimeter 1100-1300 mm.
3. SETTING UP THE SYSTEM
Make sure to be able to reach the MOWOOT II System at any time during treatment.
3.1 Set up the Console
Place the console on a flat stable surface from where it will not slip or fall.
Plug the DC power adapter cable into the DC adapter socket on the console, and then plug the power
cord into an appropriate 230-Volt wall outlet.
3.2 Put on Clothing that Covers the Treated Area
Wear light, loose, absorbent clothing over the area of your body that will be covered by the
abdominal belt, to absorb perspiration, and to keep the belt clean.
3.3 Put on the Abdominal Belt
a)
Place the belt on the abdomen, between the last rib and the
ischia (hip) and close the Velcro. The stitching should fit right in
the centre of the abdomen. Tighten to the maximum without
hurting. You should feel comfortable
b)
The tubes should exit through the left side of the belt.
