MOWOOT II
usMIMA S.L.
User Manual
Version 10
Page. 12/20
9. TROUBLESHOOTING
Problem
Root Cause and Corrective Action
The console is working in a low
pressure regardless of the pressure set.
1.
No electricity. Check the electrical wall outlet.
2.
Verify that the power supply is properly
connected to DC adapter socket to the 220-Volt
Wall outlet.
3.
Power cord. Check the power cord visually for
any defects.
4.
Defective belt. Replace belt and check again.
5.
An internal problem. Contact usMIMA S.L..
Red LED is ON
1.
Malfunction. Contact to usMIMA S.L..
The console starts working and stops
immediately.
1.
The air cannot move through the belt tubes.
2.
Check belt tubes for kinks, twists and folds.
One actuator inflates but the following
one does not.
1.
The actuator does not receive air.
2.
Check its tube for kinks, twists and folds.
The console stops working, the Status
LED turns on in red, and the buzzer
beeps.
1.
Abdominal belt is not connected properly to
console.
2.
Additional plug is not inserted into unused air
outlet.
3.
Always plug the unused air outlet with the
prong plug provided with the console. If all
connections are OK and problem persists,
contact usMIMA S.L.
Irregular noise.
1.
Transferring of vibrations. Make sure the
console is standing firmly on all four of its
bumpers.
2.
Internal problem. Contact usMIMA S.L.
10. ASSISTANCE
The only authorized to perform technical assistance interventions on the device will be the
manufacturer. For any technical assistance intervention, contact usMIMA S.L.
11. SPARE PARTS
In order to maintain both the guarantee and the functions of the product and its safety, it is necessary
to use only original spare parts supplied only by the manufacturer. Both the console, abdominal belt
and power supply can be purchased separately. Contact usMIMA S.L (
www.mowoot.com
).
