MOWOOT II
usMIMA S.L.
User Manual
Version 10
Page. 18/20
Recommended separation distance between portable and mobile RF communications equipment and the MOWOOT II
MOWOOT II is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The consumer or
the user of the MOWOOT II can help prevent electromagnetic interference by maintaining a minimum distance between portable and
mobile RF communications equipment (transmitters) and the MOWOOT II as recommended below, according to the maximum output
power of the communications equipment.
Rated maximum output power
of transmitter (W)
Separation distance according to frequency of transmitter
150 kHz to 80 MHz
d= 1.2
√
P
80 MHz to 800 MHz
d= 1.2
√
P
800 MHz to 2.5 GHz
d= 1.2
√
P
0.01
0.12
0.12
0.23
0.1
0.38
0.38
0.73
1
1.2
1.2
2.3
10
3.8
3.8
7.3
100
12
12
23
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can be
estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the
transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2
:
These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from
structures, objects and people.
