23
clEanInG FrIctIon StUdS
If film rolls begin to shudder or squeak, cleaning of tension assembly is required.
STEP 1:
remove the film rolls.
STEP 2:
remove the right side housing.
STEP 3:
dissemble the friction stud by unfastening
and removing the knob. Photo 23-1.
STEP 4:
remove the spring, metal washer, leather
washer and the friction stud. Photo 23-2.
STEP 5:
to clean, wipe the mounting hole free of excess
debris. Use rubbing alcohol. Photo 23-3.
STEP 6:
clean the friction stud groove and leather washer.
Use the Scotch Brite® pad from the cleaning Kit.
STEP 7:
to reassemble, reverse the procedure as noted
above. reset the tension as on page 1
3
.
Photo 23-1
Photo 23-2
Photo 23-3
Summary of Contents for CSL2700
Page 29: ...29 PART 1 cSl WIrInG dIaGraM...
Page 30: ...PART 2 cSl WIrInG dIaGra 30...
Page 33: ...33 NOTES...
Page 34: ...Revised 5 1 17...
