UIT2400 INSTRUMENTATION MANUAL REV A, May 2020
18 OF 18
23D. Cleaning:
No chemicals or liquid solution should be used to clean the UIT2400 housing.
The UIT2400 housing does not provide a sealed barrier to protect the internal components
from moisture. The display should be cleaned with low moisture lens cleaning cloths to
prevent scratching. Use care near the edges to assure moisture does not seep into the
housing.
23E. Submersion:
The UIT2400 housing is not rated for submersion.
23F. Calibration:
We typically recommend an annual calibration for all equipment. Per
ISO17025, the customer may, through their own QC process, create their own calibration
cycle.
23G. Service:
Before returning any equipment to Ushio for service (including warranty
evaluations) customer should contact Ushio America customer service and obtain an RMA:
24. Warranty:
The equipment you have purchased from Ushio America, Inc. has been expertly designed and
was carefully tested and inspected before being shipped. If properly operated in accordance
with the instructions furnished, it will provide you with excellent service. The equipment is
warranted for a period of twelve (12) months from date of purchase to be free of defects in
material or workmanship. This warranty does not apply to damage resulting from improper set
up, accident, alteration, abuse, loss of parts or repair by unauthorized personnel. The
equipment will be repaired or replaced, at our option, without charge to the owner for parts or
labor incurred in such repair. This warranty shall not apply unless the equipment is returned for
our examination with all transportation charges prepaid.
The internal Datalight and external Datalight II & III Software and Firmware are supplied “as-Is”
with no warranty.
