usha Steam Pro SI 3417, Instruction Manual, Page: 8 / 16

8
READ THE GARMENT LABELS AND FOLLOW THE MANUFACTURER’S IRONING
INSTRUCTIONS THAT ARE OFTEN SHOWN BY SYMBOLS SIMILAR TO THE
FOLLOWING:
TEMPERATURE TABLE:
(For Reference Only)
Temperature control setting
First Time Ironing
1 Remove any protective films or stickers from the sole plate and the cabinet.
2 Unwind and straighten the power cord.
3 Fill the water tank. (See How To Fill Water)
4 Connect the iron to a suitable mains supply outlet.
5 Turn the Temperature Dial in clockwise direction to maximum position; pilot
light glows.
6 Pilot light goes off when the required temperature is reached.
7 Move the Variable Steam Control Knob to position; steam starts coming out
from the holes in the sole plate.
8 Begin first time ironing with an old towel.
9 When the water tank is empty and there is no more steam produced; the
preparation work is completed. The iron is now ready for proper use.
HOW TO FILL WATER
1 Disconnect the iron from mains supply outlet.
2 Move the Steam Control Knob to position.
3 Release the Water Inlet Cover.
4 Fill water through the water inlet hole.
5 Fill up to the ‘Max’ level marked on the side of water tank.
Note: For best result, it is advisable to use demineralised water or distilled water. Do
not use chemically de-scaled water or any other liquids.
• Acetale
• Elastano
• Polyamide
• Polypropylene • Polyester
• Silk
• Triacetate
• Viscose
• Wool
• Cotton
• Linen