usha Steam Pro SI 3417, Instruction Manual, Page: 10 / 16

10
STEAM IRONING
1 Unwind and straighten the power cord.
2 Fill the water tank as described in “How to Fill Water”
3 Connect the appliance to a suitable mains
supply outlet.
4 Turn the Temperature Dial in clockwise direction to
‘
l l l
’ (3 dots) setting. (For optimum steam quality, do not use 1 dot or 2 dots
setting for steam ironing);
5 Pilot light glows indicating the iron is switched on.
6 Pilot light goes off when the required temperature is reached.
7 The appliance is ready for use.
8 Move the Variable Steam Control to give the desired amount of steam.
9 Turn the Temperature Dial in anti-clockwise direction to “Min”, the iron is
switch off.
10 Disconnect the iron from mains supply outlet.
11 When the appliance gets cool completely, store it in a safe place.
BURST OF STEAM
This function provides extra amount of steam to remove
stubborn wrinkles.
1. Fill the water tank as described in “How to Fill Water”
2. Connect the appliance to a suitable mains supply outlet.
3. Turn the Temperature Dial to dot-3 ‘
l l l
’ setting. Do
not use burst in ‘
l
’ & ‘
l l
’ dial position. Pilot light glows indicating the iron is
switched on.
4. Pilot light goes off when the required temperature is reached.
5. The appliance is ready for use.
6. Press the burst of steam button once. Steam will shoot from the holes of the
soleplate into the fabric being ironed and removing the wrinkles.
7. For stubborn wrinkles, wait a few seconds before pressing the burst of steam
button again. Most wrinkles can be removed within three presses.
8. Turn the Temperature Dial in anti-clockwise direction to “Min”, the iron is
switch off.
9. Disconnect the iron from mains supply outlet.