usha Steam Pro SI 3417, Instruction Manual, Page: 11 / 16

11
10. When the appliance gets cool completely, store it in a safe place.
Note: It may be necessary to press the burst of steam button a few times to start this
function. For optimum steam quality, do not operate the Burst of Steam more than
three times after the Digital number blinking stops.
BURST OF STEAM IN VERTICAL POSITION
Warning:
Do not apply steam on any clothes or fabrics that are being
worn by human or pets. Temperature of steam is very high.
This function provides steam to remove wrinkles on delicate
garments in hanging position, hanging curtains or other
hanging fabric.
1 Fill the water tank as described in “How to Fill Water”
2 Connect the iron to a suitable mains supply outlet
3 Turn the Temperature Dial to ‘
l l l
’ (3 dots) setting. Do not use ‘
l
’ & ‘
l l
’ dial
position. Pilot light glows indicating the iron is switched on.
4 Pilot light goes off when the required temperature is reached. The appliance is
ready for use.
5 Hold the iron between 15 and 30 centimetres away from the garment.
6 Press the Burst of Steam Button.
7 Steam will penetrate into the garment removing the wrinkles.
8 For Stubborn wrinkles, wait a few seconds before pressing the Burst of Steam
Button again.
9 Most wrinkles can be removed within three presses of the steam burst button.
10 Turn the Temperature Dial in anti-clockwise direction to “Min”, the iron is
switch off.
11 Disconnect the iron from mains supply outlet.
12 When the appliance gets cool completely, store it in a safe place.
Note:
1 Maintain a distance of a few centimeters from delicate fabric (Synthetics, silk,
velvet, etc.), otherwise the fabric could be damaged.
2 It may be necessary to press the burst of steam button a few times to start this
function. For optimum steam quality, do not operate the Burst Of Steam more
than three times after the pilot light goes off.