Operation and function
11/20
Fl Remote Set
14
6
Operation and function
6.1
Operating states
6.1.1
Normal operation
If a wireless water sensor detects conductive drinking water, it is
shut off via Fl.
Fl can be locked or reset via the remote control.
6.1.2
Restarting the system
An alarm reset can be done via radio remote control, via the
connected Fl or its supply voltage.
A further prerequisite is that all water detectors are dry again and
the splinter did not get wet!
6.1.3
Battery pre-alarm
The water sensors have NO battery pre-alarm!
The battery must therefore be replaced regularly
(see Maintenance) to ensure proper operation.
