Usconverters S2B2232I, Datasheet & Quick Reference

Page: 3 / 8

Datasheet & Quick Reference, S2B2232I/E v1.2 www.usconverters.com
www.usconverters.com Page 3
Default factory settings:
 Baud rate: 9600 bps
 Data bit: 8
 Parity: none
 Stop bit: 1
 Flow control: none
 Mode: Slave
 CTS/RTS: disabled
 Device name: Serial Adapter
 Bluetooth PIN code: “1234”
 Configuration mode: by DIP switches
 All DIP switches set to “000000000”
All settings can be configured using any terminal software such as TeraTerm, Putty or Hyper Terminal. Only some settings
can be configured by DIP switches. Please see the 'Setup Guide' and below parameter table for details.
Reset Button:
 Short press: The adapter disconnects and then reconnects a wireless link
 Long press (more than 3 sec.): Restores factory settings
LED Status
Status Description
Power LED solid on Power ON
Link LED solid on Bluetooth linked
Link Led flashing Bluetooth not linked
5 – 40VDC power in
Mini USB power in
Female DB9
Indication LEDs
Reset