Datasheet & Quick Reference, S2B2232I/E v1.2
www.usconverters.com
www.usconverters.com
Page 2
PIN
PIN code available for pairing
Connection type
Point-to-point
Flow control
CTS/RTS
DEC/DTE
Manual switch
Parameters configurable
by
•
Over Bluetooth (with serial terminal software)
•
Over serial port (with serial terminal software)
RS232 Signals
TX, RX, CTS, RTS, GND
Echo
Configurable by software (on/off)
NMEA 183 compatible
Yes
Works with Cisco
products
Yes, routers and switches (tested with Cisco Catalyst 3560)
Works with Windows
2008/20012 Server?
No, Windows Server does not have built-in Bluetooth drivers
Can pair while serial
interface receives data
Yes, limited
Full duplex RS232
Yes, can send and receive simultaneously both when connected over Bluetooth and when
used in pairs.
Works with iPad/iPod?
No, it will not work with iPads/iPods due to the restrictions Apple put on their Bluetooth chipset,
however it does work with most other Bluetooth enabled smartphones, tablets and devices
Number of slaves per
master
7
Parameter configuration Through the serial port or over Bluetooth
Serial port
1-port female D-sub 9-pin
Bluetooth standard
V2.1 Class 1
Frequency range
2.4GHz – 2.4835 GHz ISM Band
Hopping
1.600/sec, 1MHz channel space
Modulation
GFSK-1, DQPSK-2, 8-DPSK-3 Mbps
Tx power
Max. 18dBm (class 1)
Rx sensivity
-86 dBm typical
Antenna
S2B2232I: Internal chip antenna
S2B2232E: 2dBi di-pole, Reverse Polarity SMA male (inside threads / center receptacle)
Antenna connector (on
adapter)
Reverse Polarity SMA female (outside threads / center pin)
Power options
Mini USB cable (5VDC)
DB9 connector Pin 9 (5.0VDC, 1.0A)
Screw terminal connector (5.0 – 40VDC)
Current consumption
Max 100mA
Operating temp.
-13°F to 185°F (-25°C to 85°C)
Dimensions
87 x 33 x 16 mm
Certifications
CE, FCC, RoHS
