Page 11
PORTABLE LPV TREATER
PLACEMENT SAFETY
1. Move only with the appropriate equipment.
2. Ensure there is enough clearance from overhead obstructions and other equipment
to move the machine into its working position. 13 feet 6 inches is required to clear
the top of the inlet conveyor.
3. Stay away from overhead power lines when moving equipment. Electrocution can
occur without direct contact.
4. Operate the equipment on level ground free of debris.
USC strongly
recommends that the trailers is attached to the tow vehicle whenever the
discharge conveyor is deployed and the treating system is in use.
MAINTENANCE SAFETY
1.
Review the operator’s manual and all safety items before
working with, maintaining or operating the equipment .
2. Place all controls in neutral or off, stop motors, disable power
source, and wait for all moving parts to stop before servicing,
adjusting, repairing or unplugging.
3. Follow good shop practices:
Keep service area clean and dry.
Be sure electrical outlets and tools are properly grounded.
Use adequate light for the job at hand.
4. Keep hands, feet, hair and clothing away from all moving and/or rotating parts.
5. Clear the area of bystanders, especially children, when carrying out any
maintenance and repairs or making any adjustments.
6. Before resuming work, install and secure all guards when maintenance work is
completed.
