6
Front View
Rear View
The RECEIVER Unit
The Receiver unit has two USB Type A ports for USB 3.0 devices. The RECEIVER unit allows you
to connect up
to two USB 3.0 devices directly. The RECEIVER unit is powered by an external AC adapter and can
supply up to
900mA to each USB port.
Front View
Rear View
ITEM
TYPE
DESCRIPTION
1
USB 3.0 Type A ports
Used to connect USB 3.0 device(s) to the RECEIVER unit. Ports accept
locking or non-locking USB 3.0 Type A connectors.
2
Power ON
Unit is powered properly.
Power OFF
Unit is not powered or not powered properly.
3
Status Blinking (1Hz)
Waiting for connection to TRANSMITTER.
Status ON
TRANSMITTER/RECEIVER are linked and operating normally.
Status OFF
Fault detected; power cycle required.
4
Host ON
SuperSpeed Host detected on upstream facing port.
Host OFF
SuperSpeed Host not detected.
5
Power Port
Connects to the locking AC power supply. Required on the Receiver unit
for
correct operation.
6
Config Port
Reserved for manufacturer use.
7
Link Port (Dup Transmitter
LC)
Extension link Dup Transmitter LC fiber optic transceiver port.
Summary of Contents for CrystalLink USB 3.0
Page 20: ......
