8
11
. Place dowels in the predrilled holes along
the perimeter of the face panels located next to
the orange tags.
Note: Tags have been discontinued.
12
. Dowels must be completely vertical, if they
are sitting at an angle take the handle of your
screwdriver and tap it so that it is straight up.
14
. Locate the Head Rail (G) and place it on the dowels located at the bot-
tom of the bed. They are the 2 holes that are 3/8” from the edge. Make sure
the wooden strip is facing inward and the cam holes are facing out. Do not
secure the cams yet.
13
. Locate the side rails (FL & FR). Stand at the bottom of the face panels.
Place FR on top of the dowels of face panel ER so that the slot in the side
rail is facing in and the edge is flush where you are standing. The big hole
on the side rail will be down by the top. Do the same thing for FL, place
over dowels on face panel EL. Do not secure with cams yet.
15
. Locate the Foot Rail (H) and place it over the 2 dowels at the top of the
face panels. These are 1 7/8” away from the edge. Make sure that the strip is
facing inward and so are the cam holes. Do not secure cams yet.
1)
2)
3)
