6
Section 1 | Important Information
1.1 Safety Notices
ONLY USE SILICONE OIL or a DISTILLED WATER + GLYCOL BLEND.
(See section 4.1)
The use of Personal Protection Equipment (PPE) is REQUIRED.
Follow all federal, state, and municipal laws, codes, and ordinances.
Please make sure the power connection is correct and well-grounded. (See section 1.3)
Fluid lines should be unobstructed without any hard bends in the run.
Install gasket inside fittings before use. (See section 4.1)
Apply a rag to wipe the parts clean after washing away stains; do not use hard objects.
Do not use flammable, corrosive, or explosive substances on, in, or near the equipment.
Do not run the liquid pump dry, allow plenty of time to prime the pump.
Do not unplug the unit while it is running.
Install the equipment in a climate-controlled facility ONLY.
Never use a generator to power this equipment.
Do not change the length of the power cable.
Repairs must be made by USA Lab or by instruction from USA Lab.
If there is a problem, do not continue to use the heater.
Contact us immediately.
USA Lab, Inc.
Main / Sales: (734) 855-4890
Tech / Dan: (734) 469-2313
Dave: (734) 564-5952
