10
Visit us online at www.USWaterSystems.com Give us a call at: 1-800-608-8792
Filter Preparation
7) Separate the parts and lay them out like the picture on the previous page.
8) Lubricate the distributor and tank O-ring on the primary tank adaptor.
9) Install an upper basket on the bottom of the primary tank adaptor.
10) Slide the primary tank adaptor upper basket over the distributor tube on the
CARBON
tank. Slide it down and tighten it hand tight by turning it clockwise. Snug it with both hands.
DO NOT use tools to tighten the adaptor or damage may occur. It doesn’t need to be really
tight because the O-ring is creating the seal.
