1)
CLOSE STEAM RELEASE VALVE
Ø
Turn valve clockwise to close.
2)
FILL TANK WITH WATER
Ø
Remove the cap and pour tap water into the steamer.
Ø
Do not put cleaning fluids in the steamer.
3)
CONNECT HOSE
Ø
Lift the
socket cover
on the front of the steam cleaner and
Ø
insert the square end of the hose into the socket until you hear a click.
4)
PLUG IN
Ø
Plug the power cord
into an outlet.
Ø
The steam cleaner should be the only appliance plugged into an outlet.
Ø
Use only a 12gauge extension cord with maximum length of 25ft.
5)
POWER ON THE STEAM CLEANER:
Ø
Press the POWER AND STEAM buttons
Ø
It will take
10 minutes before your steamer is ready to use
.
Ø
Pressure gauge will be
≥
4
Ø
Steam Ready
light will stop blinking and will turn solid when ready.
6)
BLEED THE HOSE BEFORE USING:
Ø
Squeeze the
gray
trigger on the hose handle to shoot excess water from the hose into a towel
for about 10 seconds.
Ø
Choose Cleaning Attachment.
During start-up, the holding tank may run low on water causing the
orange
low
water light to blink and steamer to beep.
Ø
Add water
Ø
Restart the steamer by turning off and on the
Power
and
Steam Release
buttons.
Quick Start Guide
4
ON/OFF STEAM
READY
Tank Cap
During use, the
Steam Ready
light will blink indicating the boiler is heating.
