Cleaning
10
Toilets -
DO NOT PUT THE BRUSH OR HOSE HANDLE UNDER WATER
Ø
Exterior
cleaning uses the small triangular brush with the 3-hole nozzle on low or medium
steam.
Ø
Interior
cleaning use
the
1” nylon round brush with the 1-hole nozzle
for cleaning on low or
medium steam. Start from the top of the toilet and work down to the base.
Ø
Faucets
Use
the
1-inch nylon round brush or small triangular brush on low steam.
Bathtub/Shower
Ø
Fiberglass
–For crevices use the 1” nylon brush with the 1-hole nozzle. Use large triangle brush
with bonnet on walls.
Ø
Ceramic
–
Use the large triangular brush with a bonnet on low steam setting to avoid scratching
surface.
Ø
Shower door –
Use the large triangle brush with a bonnet on the low steam setting
Walls
Ø
Walls, painted trim or molding
Use the large floor brush with a bonnet on the low steam. Pretest an area to be cleaned for paint
thickness since it is easy to take paint off walls.
Ø
Oil Paint
- Use large triangle brush on low steam. Do not stay on one spot too long
Ø
Latex Paint
- Use large triangle brush with a towel on the low steam setting. Do not apply
pressure. Move quickly with smooth strokes or use nozzle about 5-inch off.
Wallpaper Removing
Use wallpaper remover attachment (sold separately) or use the large triangle brush with bonnet.
Start in one corner hold in one spot for 5 to 10 seconds. Pull corner out start peeling back while
moving wallpaper remover or triangle brush slowly back and forth.
Tracks, Moldings
Ø
Tracks -
Use 1-hole nozzle with 1” nylon brush on low or medium steam.
Ø
Moldings -
Use 1-hole nozzle on low or medium steam. Hold the nozzle in one hand and a
towel in the other hand. Move the nozzle and towel at the same time in one direction, blowing
the dirt into the towel
Ø
Blinds
USE ONLY ON METAL BLINDS
Close blinds. Use a low steam setting with the large triangular brush with an attached bonnet.
Work gently in a horizontal direction.
Windows
Ø
Window Sills and Thresholds
Use the 1” nylon brush with 1-hole nozzle on medium steam.
Ø
Window Frame
Use 1” inch brass brush directly on the surface to remove dirt and to polish.
Wipe with towel.
Ø
Window Screens
Use the large triangular brush with bonnet or the window squeegee tool on a
low steam.
