US Steam BlueEvolution S+, User Manual

Page: 9 / 29

9
8
Start-up steam
Insert the mains plug into the wall socket.
Turn the general switch
8
to ON,
the display will light up showing the menu and will remain
in stand-by waiting for a function to be selected by the user,
differently, the display will switch to energy saving after 60
seconds (Standby).
If the machine was in Standby status press the start icon.
Press the “STEAM” icon to start the boiler. During the
heating stage, it is possible to display the temperature and
pressure which gradually raise up to the operating condi-
tions.
During this stage, the “STEAM” icon will blink and the dis-
play status will show “HEATING”.
Steam Function End
Press the “STANDBY” icon to stop the appliance.
The display will show the “STANDBY” icon.
Steam function
Hold down steam lever P
on the handle to emit steam.
WARNING:
Water droplets may occur on first use, which may be due to
incomplete heat stabilisation in the housing. For this reason,
we recommend aiming the first steam jet at a cloth until an
even flow of steam is achieved.
INFO:
For sensitive materials carry out a test first on a sample or
on an inconspicuous, concealed area. A
8
P
STEAM VACUUM
HEATING
WATER
Status:
MENU STANDBY