12
13
Shutting down
To ensure the functionality, cleanliness and hygiene of the
appliance and accessories, follow this procedure to shut
down the appliance:
1) Remove the filter bowl, empty out the water and re-insert.
2) Set the suction mode to MIN (one notch within the "MO-
TOR" icon).
3) Clean the suction tube and accessory parts in suction
mode.
Suck approx. 0,52 gal of a solution of water and neutral de-
tergent through the accessory parts used (steam tube, ex-
tension tube, etc.) to clean.
INFO:
Repeat the rinsing process with clear water if there is a lot
of foam.
Alternatively, the steam suction hose can also be cleaned
using a suitably sized sponge soaked in disinfectant.
4) Empty the filter bowl, clean and re-insert without cover.
5) Switch off the functions you have selected by pressing the
relevant buttons on the display. The appliance switches off
after approx. 60 seconds.
6) Disconnect from the mains power by pulling out the plug.
7) Pull the steam suction hose out of the appliance for it to
dry out.
8) Store the appliance with open filter bowl in a well ventila-
ted and frost-free room.
T4
T3
Summary of Contents for BlueEvolution S+
Page 1: ...1 US STEAM 2440 Chambers Street Ste AVenus Texas 76084 817 297 7745 ussteam net ...
Page 16: ...16 19 Service Maintenance Part 1 Hot water module descaling ...
Page 19: ...19 24 Service Maintenance Part 2 Boiler descaling ...
Page 24: ...24 30 Service Maintenance Part 3 Polyester filter optional water filter and O rings ...