US Robotics MAXg User Manual Download Page 22

Page: 22 / 113

Wireless MAXg USB Adapter: User Guide

B. Double-click the CD drive.

2. If prompted by Windows Security, click

Run autorun.exe

. If prompted by User

Access Control, click

Continue

3. Click

Install

and follow the on-screen instructions.

4. If a window appears warning that the software has not passed Windows testing,

continue with the installation. USRobotics has thoroughly tested the operation of

the software with Windows Vista, XP, 2000 and Me to ensure its safe operation.

Windows Vista: Click

Install driver software anyway

Windows XP: Click

Continue Anyway

Windows 2000: Click

Yes

5. When you are prompted, insert the USB adapter.

6. Windows XP only:

A. If the Found New Hardware Wizard asks to connect to the Windows update

Web site to search for software, select

No, not this time

and click

Next

B. With

Install the software automatically

selected, click

Next

file:///G|/CSO/T-Writer%20Repository/Networking/5425%...20Refresh%20USB/User%20Guide/English/install-usb.html (2 of 3)6/26/2007 9:21:30 AM

Summary of Contents for MAXg


















































































































Search results

Summary of Contents for MAXg

Reviews:

Related manuals for MAXg

Brands by name

Popular brands

US Robotics MAXg, User Manual

Search results

Summary of Contents for MAXg

Reviews:

Related manuals for MAXg

Brands by name

Popular brands