3-4
Courier V.Everything Internal Modems: Getting Started
Windows 95 Dial-Up Networking: Internet Access
This section explains how to set up the Courier for accessing the
Internet using Windows 95 Dial-Up Networking. You can also
use Dial-Up Networking for accessing remote LANs.
Make sure Dial-Up Networking is installed.
1
Click Start | Settings | Control Panel.
2
From the Control Panel, double-click on Network.
If a Dial-Up Adapter is listed, go to step 5. If not, continue
with step 3.
3
Go back to the Control Panel and double-click on
Add/Remove Programs
.
4
Click the Windows Setup tab. Then double-click on
Communications
. Click on Dial-Up Networking to check
the box. Click OK, then OK.
Insert your Windows 95 Setup diskette or CD-ROM when
you are prompted, and Windows 95 will install Dial-Up
Networking.
Add Dial-Up TCP/IP Support.
5
Click Start | Settings | Control Panel.
6
From the Control Panel, double-click on Network.
If TCP/IP -> Dial-Up Adapter is listed, go to step 8. If not,
continue with step 7.
7
Select Add… | Protocol | Microsoft | TCP/IP | OK.
Insert your Windows 95 Setup diskette or CD-ROM when
you are prompted, and Windows 95 will install TCP/IP
protocol support.
