US Robotics 9108, Quick Installation Manual

Page: 12 / 136

10
Status LEDs
The gateway has several LEDs on its front. The LED conditions listed below indicate the
operational status of the gateway.
Solid The gateway is powered on.
Off The gateway is powered off.
Solid A wireless device is connected to the gateway.
Flashing
The gateway and computer are exchanging data over a
wireless connection.
Off No wireless client is connected to the gateway.
Solid The gateway is connected to the Internet.
Flashing The gateway is exchanging data with the Internet.
Off
There is no active ADSL connection or the device is in
ADSL bridge mode. For information on bridge mode,
see the User Guide on the installation CD.
Solid An ADSL link is established.
Flashing The gateway is attempting to create an ADSL link.
Off There is no current ADSL connection.
(1-4)
Solid
There is a physical connection between the gateway
and the computer through the corresponding Ethernet
port (note the port numbers above the LEDs).
Flashing
The gateway and computer are exchanging data
through an Ethernet port.
Off
There is no physical connection between the gateway
and the computer through the Ethernet port.
Solid
A printer is linked to the gateway. See the User Guide
on the USRobotics installation CD-ROM for
information on using a printer with the gateway.
NOTE: Do not connect any device other than a self-
powered printer to the USB port. The USB connector
can only be loaded a maximum of 0.11A. Overloaded
operation is hazardous.
Flashing The gateway and printer are exchanging data.
Off
There is no printer connected to the gateway’s USB
port.