Document Title:
MTP
®
Loopback Casing Installation
Document Number: AEN-1430, Rev. 1.0
14 of 17 THE USE OF SAFETY GLASSES FOR EYE PROTECTION IS RECOMMENDED
5.3
If a label will be affixed to the loopback assembly, avoid covering the window in
the casing. This will allow the outer housing to move freely within the casing.
Figure 5.3
6.0
Operation
6.1
Inserting Loopback Assembly
Align the loopback assembly and the adapter port with the connector key properly
oriented. Grasp the handle or the body of the casing and gently push into the port
until a “click” is heard. Ensure that the loopback assembly is inserted straight into
the port.
Figure 6.1
6.2
Extracting Loopback Assembly
Grasp the handle or the body of the casing and gently pull away from the port
until the connector disengages. Ensure that the loopback assembly is pulled
straight out of the port.
Figure 6.2