URYU UBX-AF Series, Instruction Manual

Page: 9 / 26

8) SPM Motor with Strong Magnet
⇒
High Torque Efficiency & Maintenance Cost Reduction
Adopted SPM brushless motor emits no noise and vibration generated from brushes and reduces
tool running cost.
9) PhoeniX series Pulse Technology
⇒
Increased Quality & Performance
URYU Phoeni X pulse technology improves accuracy, efficiency and durability.
10) Safety Feature
UBX-AF tool stops its operation to minimise impacts from e.g. excessive operation and short circuit
to operator and workpiece.
11) Cooling Ventilator
⇒
Reduction in heat generation efficiently
Cooling ventilator helps to make more frequent fastening cycles by reducing heat generation.
1.4 What’s In The Box
Check shipment for transit damage and ensure that the correct UBX-AF model fitted with a casing
protection cover, this instruction manual and declaration of conformity have been supplied.
1.5 Installation
Securely install and fix the system (UCC-100Z and UBX-AF) to avoid personal injury in case of an
emergency such as earthquake.
Familiarise yourself with the followings to install and fix the system firmly.
1.5.1 Place To Install
1) Install the system inside a building. Never expose the system to rain or direct sunshine.
The system is not waterproof.
2) Never expose the system to corrosive gas, cutting oil, oil mist and metal chips.
3) Install the system with good ventilation. Neither of moisture nor dust is good.
4) Do not expose the system to vibration.
1.5.2 Workstation Requirements
Note
1
…Lifetime of motor is much affected by ambient temperatures.
Use under the lowest possible temperature within the range of ambient temperature.
Note
2
…Short period temperature range for transportation
Note
3
…Above categorizations are Installation category (I~IV) and contamination level (1~4) as per IEC 60664.
IEC stands for International Electrotechnical Commission.
7
Place Indoors only
Ambient Temperature 5°C ~ 40°C (41°F ~ 104°F)
Note
1
Ambient Humidity 80%RH and less (no dew)
Storage Temperature 0°C ~ 40°C (32°F ~ 104°F) (no dew)
Note
2
Installation Category
(Overvoltage Category)
Installation Category
Ⅱ
Note
3
Pollution Degree Pollution Degree 2
Note
3
For indoor use only