14
Do not use tools if switch does not turn it on or
off. Any tool that cannot be controlled whith
the switch is dangerous and must be repaired.
Disconnect the plug from the power source
before making any adjustments, changing ac-
cessories or storing the tool. This preventive
safety measures reduce the risk of accidental
starting of the tool.
When the power tool is not in use, store it out
of the reach of children, and do not allow in-
dividuals who are not familiar with the power
tool or these instructions to operate it. Power
tools are dangerous in the hands on untrained
users.
Maintain the power tool. Check for misalign-
ment or binding of moving parts, broken parts,
and any other condition that may affect the
operation of the power tool. If it is damaged,
have it repaired before using. Many accidents
are caused by poorly maintained power tools.
Check for misalignment or bonding of moving
parts, breakage parts, and any other condition
that may affect the tools operation. If you find
a damaged tool, take it to service before use it.
Use only accessories that are recommended by
the manufacturer of your model. Suitable ac-
cessories for one tool, may become hazardous
when are used on another tool.
Keep cutting tools, sharpened and clean. Cut-
ting tools in good condition with sharpened
edges, are less likely to stuck in workpieces or
easier to control.
Is recommendable to use a safety device suit-
able, such a thermal and diferential switch
when you are using an electric equipment.
SERVICE
Tool service must be perfomed only by quali-
fied repair personnel. Service or maintenance
performed by unqualified personnel could re-
sult in a risk of injury.
SPECIFIC SAFETY RULES FOR
TIRE CHANGERS
WARNING: This instruction manual is the
important part of the product. Please read it
carefully and keep It properly.
USE
This machine is only applied to mount, de-
mount and inflate the tire in the specified
scope and not for any other purpose.
The manufacturer will not be responsible for
the damage or injury caused for the operation
not properly and out of the range.
NOTE: This machine should be operated by
the special trained qualified personnel. When
operating, the unauthorized personnel will be
kept far away from the machine.
Please note the safety label stuck on the ma-
chine.
Operators should wear safety protective fa-
cilities such as working suit, protective glasses,
eye plug and safety shoes. Keep your hands
and body from the movable parts as possible as
you can. Necklace, bracelet and loosen cloth-
ing may cause dangerous to the operators.
Tire changer should be installed and fixed on
the flat and solid floor. The more than 0.5m of
distance from the rear and lateral side of the
machine to the wall can guarantee the perfect
air flow and enough operation space.
Do not place the machine in the site of high
temperature, high humidity, dust and with
flammable and corrosion gas.
Without the permission from the manufac-
turer, any change on the machine parts will
cause injury/damage to the machine/operator.
Pay attention that the tire changer should be
operated under the specified voltage and air
pressure.
If you want to move the tire changer, you
should under the guidance of the professional
service personnel.
WARNING: Do not reach any part of your
body under the demount tool.
• When breaking bead, the bead breaking
blade will quickly move leftwards.
NOTE: When press the tire, the opened clamp
cylinder may injury the hand of the operator.
Remember, do not touch the side wall of the
tire.
• When clamping the rim, do not reach your
hand or other parts of the body in between the
clamp & the rim.
IMPORTANT: Do not stand behind the col-
umn to avoid the column from injuring the
persons when swing.
WARNINGS:
When rapid inflation, ensure the wheel
clamped.
DLL21-DLL24 manual.indd 14
10/07/15 15:14
