DS1098-047
34
4.7
SYSTEM
Change system information, such as date, time and region, change password and permissions, etc.
4.7.1
GENERAL SETTINGS
4.7.1.1
General Settings
Device Name:
Enter the name for your WIRELESS NVR. The name can include both letters and numbers.
Device ID:
Enter the desired ID for your WIRELESS NVR. The device ID is used to identify the WIRELESS NVR, and can
only be composed of numbers. For example, two WIRELESS NVRs are installed in the same place, the Device ID is
000000 for one of the WIRELESS NVRs, and 111111 for another WIRELESS NVR. When you want to operate the
WIRELESS NVR with a remote controller, both of the WIRELESS NVR may receive the signal from controller & act at the
same time. If you want to control only the WIRELESS NVR with ID 111111, you can input the Device ID 111111 in login
page with remote controller for further operations.
Language:
Select a language you would like the system menus to be displayed in. Multiple languages are available.
Video Format:
Select the correct video format for your region.
Menu Timeouts:
Click the drop-down menu to select the time to exit the main menu when the wireless NVR is idle. The
system defaults to 1 minute, and you can adjust the time to 30s, 1 minute, 2 minutes, 5 minutes, 10 minutes and close
lock. You can also disable this function
by selecting “OFF” (password protection will be temporarily disabled).
Web Session Timeout (min):
The web session timeout period allows the web to communicate with the NVR within the
setting time range. If the setting time is exceeded without operating the web, the web will prompt a timeout, and the
communication between the web and the NVR session ends.
Preview/Playback Session Timeout:
Web preview/playback session timeout period. This function is used in conjunction
with Web Session Timeout (min).
Show Wizard:
If you want to display the startup wizard every time you turn on or restart the NVR, please check this
option.
4.7.1.2
Date and Time
