DS1098-047
26
4.4.1
MOTION ALARM SETTING
Channel
: Channel name.
Buzzer
: The NVR can use its internal buzzer to sound an alarm. You can set the buzzer duration in seconds when motion
is detected.
Record
: Click
icon to choose which channel to be recorded when the motion detection is triggered.
Post Recording
: You can set the duration of the NVR's continuous recording after the event occurs. The recommended
recording time is 30 seconds, but it can be set to a maximum of 5 minutes.
Show Message
: Check this box to display the icon on the live view display screen when motion is detected.
Send Email
: You can have the NVR automatically send you an email when it detects motion.
FTP Picture Upload
: After the alarm is triggered, upload the alarm picture to the FTP server.
FTP Video Upload
: After the alarm is triggered, upload the alarm video to the FTP server.
Picture to Cloud
: After the alarm is triggered, upload the alarm picture to cloud storage.
Video to Cloud
: After triggering the alarm, upload the alarm video to cloud storage.
Full Screen
: If this function is enabled and a motion alarm is detected in the channel, the channel will be displayed in full
screen.
4.4.2
EXCEPTION (ABNORMAL ALARM)
Event Type
: Select the event type from the options below
：
-
No Space on Disk
: When an HDD is full.
-
Disk Error
: If the HDD is not detected properly.
-
Video Loss
: If a camera is not connected properly.
Switch
: Check the box to enable the monitoring of the event.
Buzzer
: Set the buzzer duration when the event occurs (Off/10s/20s/40s/60s). To disable buzzer, select
OFF
.
