urmet domus DRV-065S-066S, Quick Manual

Page: 37 / 108

2.2.1.7 Resolution
This menu option is used to set the resolution type to be reached for recording on the selected camera. In general, Urmet DVR
DVS devices are capable of supporting, according to the model, the following recording resolutions:
DCIF ”,
“
4CIF
”
, “ 2CIF ”, ” CIF ”,
and “ QCIF ”. Use “
!
” to select the resolution type.
Correspondence between code and respective resolution in PAL format are shown in the following table.
CODE RESOLUTION - PAL
4CIF
704x576
DCIF 528x384
2CIF 704x288
CIF
352x288
QCIF 176x144
Table 2: correspondence between code and PAL resolution
Ref.1093/064S (4 channel video/audio H.264 4CIF/CIF)
The following resolution options can be selected on Urmet DVR DVS ref.1093/064S:
!"
“ 4CIF ”, ” DIF ” “ 2CIF ”, ” CIF ” and “ QCIF ” on all channels
Ref.1093/065S (8 channel H.264 2CIF/CIF)
The following resolution options can be selected on DVR DVS ref.1093/065S:
!"
“
2CIF
”, ”
CIF
” and “
QCIF
” on all channels
Ref.1093/066S (16 channel video/audio H.264 2CIF/CIF)
The following resolution options can be selected on DVR DVS ref.1093/066S:
!"
“ 2CIF ”, ” CIF ” and “ QCIF ” on all channels
IMPORTANT NOTE
In these models the Sub-stream performances (resolution and frame-rate) depend on the parameters set in the DVR Recording
menu (i.e. Main-stream parameters).
2.2.1.8 Frame rate
The number of frames stored for each selected camera second can be selected using this item.
Possible options are: “
1/16 ”, “ 1/8 ”, “ 1/4 ”, “ 1/2 ”, “ 1 ”, “ 2 ”, “ 4 ”, “ 6 ”, “ 8 “, “ 10 ”, “ 12 ”, “ 15 ” “ 16 ”, “ 18 ”, “ 20 ”, “ 22 ” and “ 25 ”.
Use “
!
” to select.
A high frame-rate corresponds to films played back in real time with more fluid sequences. A lower frame-rate saves time in terms
of hard disk space occupation, to the detriment of recording quality (less fluid sequences). Selecting a lower frame-rate will save
hard disk space.
IMPORTANT NOTE
The "Bit rate" value is set automatically according to the "Frame Rate" selected by users.
2.2.1.9 Bit rate
This option is used to set the bit rate (fixed bit rate) or max bit rate (variable bit rate) to be used. Possible options are: “
32 kbps
”,
“
48 kbps
”, “
64 kbps
”, “
80 kbps
”, “
96 kbps
”, “
128 kbps
”, “
160 kbps
”, “
192 kbps
”, “
224 kbps
”, “
256 kbps
”, “
320 kbps
”, “
384
kbps ”, “ 448 kbps ” “ 512 kbps ”, “ 640 kbps ”, “ 768 kbps ”, “ 896 kbps ”, “ 1 Mbps ”, “ 1.25 Mbps ”, “ 1.5 Mbps ”, “ 1.75 Mbps ”, “ 2 Mbps ”.
Use “
!
” to select. A numeric character input bar will appear when the “
user
” option is selected.
Use the number keys 0 9 on the front panel to enter a character.
e the cursor.
to 8192 can be entered.
to modify the "Bit Rate" value which is set automatically according to the "Frame Rate".
r disenable selected camera recording. To enable, select the respective check box using “
"#
”
Symbol “ ” indicates that the recording option is enabled; symbol “
×
” indicates that it is not.
Use the arrow buttons “
"#
” to mov
Press “
EDIT
” to delete a character.
A numeric value from 32
IMPORTANT NOTE
It is strongly recommended not
2.2.1.10 Enable rec
This option is used to enable o
and press “
ENTER
” or “
EDIT
”.
DS1093-024 37