How to use this Configuration Guide
Each entry panel in the system must be individually programmed.
Primary entry panels and Secondary entry panels are programmed using the same method but have a number of
different settings.
Whether a panel is a Primary panel or a Secondary panel depends not only on its configuration but also on its
connection within the system. Refer to the connection diagram supplied with the equipment or the diagram on
Page 1 to determine whether the panel you are configuring is Primary or Secondary.
It is not important whether Primary or Secondary entry panels are programmed first, in fact a system can be
installed with only Secondary entry panels and Primary entry panels can be added later and vice versa.
In this guide, configuration steps that are specific to Primary panels are covered on Page 6 and steps specific to
Secondary panels are covered on Page 7.
Note – When configuring the entry panel it is necessary to pass through each
step and arrive back at the top level menu for information to be saved.
Top level menu
Page 2
