Primary entry panels only
PRIMARY
SECONDARY
Use the
or
buttons to select
PRIMARY
and press
FROM: 0
TO: 3
The
RANGE OF BLOCKS
depends on the number of blocks in the installation. If there
are four blocks for example, then the range is from
0
to
3
.
Press
to move to the
TO
entry.
Press
and then enter the last block number.
3
In this example.
Press
In a system with only one primary entry panel the ID is always
0
.
In this case just press
.
In a system with two, three or four Primary panels, each must have a different ID.
To change the panel ID to
1
for example, just press
then press
The ID of the panel is determined by where it is connected in the system
.
You must refer to the connection diagram of your system for the ID of each panel
.
Page 6
