III. Function Table
7
III. Function Table
Function
Description
1. Copy
USB/SD/microSD/CF flash copy.
2. Compare
This option makes bit-for-bit comparison between the source and all other copied flash
cards.
3. Copy+Compare
This option will make a copy first and then compare the copied Flash media with the
source immediately after the copy has finished.
4. Capacity Check
Checks the Flash real capacity.
5. Information
5.1 USB Info
This feature will show USB/SD/CF flash's information; file format, content size, and
capacity.
5.2 System Info
This feature will show information of the duplicator system, including controller model
number and software version.
6. Utility
6.1 Do Format
6.1.1 Auto Format
To Execute flash FAT 16/32 format
6.1.2 FAT Format
Format media to be FAT16.
6.1.3 FAT32 Format
Format media to be FAT32.
6.2 Measure Speed
This function can measure the flash read and support speed. This function might
damage the format and content.
6.3 Media check
6.3.1 H3 Safe 100%
To check the quality of flash by reading it. This safe check will
not delete flash content and format.
6.3.2 H5 RW 100%
To check quality by "0" and "1" reading/writing the flash. Normal
check will delete content and format.
6.3.3 Setup Range
To setup the check area from 1% to 100%
6.3.4 Setup Error Limit
Set the % of error tolerance when checking the Flash.
6.4 Quick Erase
To erase flash media flash content. It will keep the FAT format.
6.5 Full Erase
To completely erase data of flash including format and content, but it needs more
time.
6.6 DoD Erase
Erase Flash three times complying with USA Department of Defense (DoD) standard.
6.7 System Update
System firmware update via the Flash media. i.e. USB/SD/CF/MSD.
6.8 Calc. CheckSum
Calculate the CheckSum number of the Flash media in source port.