URC Total Control TRF-ZW10 Owner'S Manual Download Page 44 | Manualshive

Page: 44 / 44

URC Total Control TRF-ZW10 Owner'S Manual Download Page 44

42

Total Control

TRF-ZW10

Owner’s Manual

Limited Warranty Statement

https://www.urc-automation.com/legal/warranty-statement/

End User Agreement

The terms and conditions of the End User Agreement available at

https://www.urc-automation.com/legal/end-user-agreement/

shall apply.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one more of the
following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Regulatory Information to the User

• CE conformity Notice Products with “CE” marking comply EMC Directive

2014/30/EU issued by the commission of the European Community.

1. EMC Directive

• Emission
• Immunity
• Power

• Declaration of Conformity

“Hereby, Universal Remote Control Inc. declares that this MRX-12 is in
compliance with the Essential requirements.”

Warning!

The manufacturer is not responsible for any Radio or TV interference caused by
unauthorized modifications to this equipment.

Changes or modifications not expressly approved by the manufacturer could void
the user's authority to operate the equipment.

«
...
42
43
44

Summary of Contents for Total Control TRF-ZW10













































Reviews:

No comments