40
Total Control
TRF-ZW10
Owner’s Manual
Factory Default
Resets the memory of the TRF-ZW10 to
factory settings
. All existing programming is
erased
. The gateway
requires a download from the URC software
in order to be
programmed again.
If this controller is the
primary controller
for your network, resetting it will result in
the nodes in your network being orphaned and it will be necessary after the reset to
exclude and re-include all of the nodes in the network. If this controller is being used as
a
secondary controller
in the network, use this procedure to reset this controller only
in the event that the network primary controller is missing or otherwise inoperable.
To factory default the TRF-ZW10,
turn the gateway over
and locate the Reset button.
Using a thin object,
press and hold the button down for fifteen
(
15
)
seconds
.
WARNING!
Only use this button when instructed by URC’s Technical Support team.