25
Total Control
TRF-ZW10
Owner’s Manual
Scenes
This section of the document describes the available options in the
Scenes
section.
1.
Available Scenes:
This list displays the names of all Scenes programmed
on the TRF-ZW10.
2.
Add Scene:
Select this button to begin the process of creating a Scene.
3.
Delete Scene:
Select an available Scene and click this button to
permanently remove it. This action cannot be reversed.
4.
Scene Programming Window:
This screen is where each individual
Z-Wave Scene can be programmed. Below are descriptions of the Scene
Tools available at the top of the window:
•
Add Action:
Displays the
Action
window where the programmer has
access to every included Z-Wave device.
This window allows the programmer to
add single Z-Wave
commands to the selected Scene
.
•
Add Delay:
Select this button to display the Delay window which
allows the programmer to enter a delay and customize the hours,
minutes, and seconds of that delay step.
•
Test:
Select to test the selected Scene.
•
Delete:
Click on this button to permanently remove the selected Scene,
this process cannot be reversed.
1
2
3
4