UrbanFire 2, Installation And Operating Instruction Manual

Page: 5 / 20

Page 5 of 22
GENERAL SAFETY
•
Solid fuels shall not be burned in this fireplace.
•
Keep the appliance area clear and free from combustible materials, gasoline and other
flammable vapors and liquids.
•
Inspect the burner prior to each use, if the burner is damaged it must be replaced prior to use.
NOTE: Use only with burner part# UFP 1-02-1
•
Inspect the pilot prior to each use, if the pilot is damaged, plugged or does not light, replace
damaged components prior to use.
•
Do not use this appliance if any part has been under water. Immediately call a qualified
service technician to inspect the appliance and to replace any part of the control system and
any gas control which has been under water.
•
Do not locate the gas supply hose in a pathway where people may trip over it or in areas
where the hose may be subjected to accidental damage.
•
Children and adults should be alerted to the hazards of high surface temperature and
should stay away to avoid burns or clothing ignition.
•
Young children should be carefully supervised when they are in the area of the
appliance. Keep cover of the fireplace secured on the appliance when not it use
to prevent children from playing, touching or eating the tempered glass.
•
Clothing or other flammable material should not be hung from the appliance or
placed near the appliance.
•
Any guard or other protective device removed for servicing the appliance must be
replaced prior to operating the appliance.
•
Installation and repair should be done by a qualified service person. The appliance
should be inspected before use and at least annually by a qualified service person.
More frequent cleaning may be required as necessary. It is imperative that control
compartments, burners and circulating air passageways of the appliance be kept
clean.