Urban Fires UF670RC & UF700RC Installation & Use Instructions V1.3 Sept 2019 Page 4
1.0 Product Description:
The UF670RC and UF700RC Signature gas fires are designed for outdoor use only. These appliances
require no flue. They must be permanently installed into an incombustible masonry cavity, firebox, firebowl,
firepit or firetable (see
www.urbanfires.co.uk
).
The fire is operated by a remote handset. The handset controls a series of electronic circuits to operate (1)
the ignition sequence, (2) up/down control of flame height and (3) to turn OFF the appliance.
The Data Label, containing all technical information such as serial number, gas type, Injector marking, etc,
can be found attached to the control box under the burner.
UF670RC will be supplied with a bespoke circular burner plate (for example the 825mm dia below) to fit the
vessel into which the burner will be installed. The UF700RC Square or Rectangular burner plate will also be
made to measure.
825
825
825
