background image

Urban Fires UF670RC & UF700RC Installation & Use Instructions V1.3 Sept Page  13  

14.0 User Instructions

14.01 If the burner system is exposed to weather directly from above (for example, in a firebowl, firepit or a 
firetable) INSTALLER you must advise the end user that a Weathercover to protect the burner and pilot is 
essential to the correct long term operation of the appliance. 

This component should be used whenever the 

fi re is not in use. Failure to do so will void the warranty.  

Urban Fires can provide a steel or fabric weathercover to order. 

To fit the optional weathercover ensure the fire is off and cooled. 

The fire MUST NOT be operated while the cover is fitted. 

The cover MUST NOT be fitted while the fire is hot. A cooling period of 20-30 minutes should be observed 
before replacing the weathercover.  

Objects such as wood, coal, charcoal, fire logs or any other solid fuels MUST NOT be burnt on the outdoor 
gas burner. Cigarettes or other materials should not be thrown into the fire. 

Under no circumstances should any part of your body enter the gas fi replace during start-up or whilst 

the fi re is running.

Summary of Contents for UF670RCS





















Reviews: