P A M P O C K E T
P A M P O C K E T
P A M P O C K E T
P A M P O C K E T
ASSE M BLY AND M O UNTING INSTR UCTI O NS
M A - 8 0 2 8
S
S
S
STEP 5
TEP 5
TEP 5
TEP 5
ATTACH THE FIXTURE TO THE MOUNTING PLATE BY SLIDING THE
FIXTURE OVER THE TOP OF THE MOUNTING PLATE AND THEN
SECURE THE FIXTURE AT THE BOTTOM WITH THE SET SCREWS.
BE CAREFUL TO AVOID SCRATCHING THE FINISH ON THE
FIXTURE.
IMPORTANT: IF THE FIXTURE IS INSTALLED IN AN EXTERIOR
LOCATION, RUN A SMALL BEAD OF SEALANT AROUND THE
PERIMETER OF THE BACKPLATE TO PREVENT WATER FROM
REACHING THE WIRE CONNECTIONS.
STEP 6
STEP 6
STEP 6
STEP 6
INSTALL LIGHT BULB IN FIXTURE SOCKET AND RESTORE POWER
TO THE CIRCUIT. CONFIRM PROPER OPERATION OF THE LIGHT
FIXTURE.
E L E C T R I C A L C O N F I G U R A T I O N T A B L E
E L E C T R I C A L C O N F I G U R A T I O N T A B L E
E L E C T R I C A L C O N F I G U R A T I O N T A B L E
E L E C T R I C A L C O N F I G U R A T I O N T A B L E
F R O M H O M E
F R O M H O M E
F R O M H O M E
F R O M H O M E
F R O M L U M I N A I R E
F R O M L U M I N A I R E
F R O M L U M I N A I R E
F R O M L U M I N A I R E
GENERAL NOTE:
GENERAL NOTE:
GENERAL NOTE:
GENERAL NOTE: USE UL LISTED WIRE NUTS FOR THE
WIRING CONNECTIONS IN THIS LUMINAIRE. WRAP WIRE
NUT CONNECTIONS WITH UL LISTED ELECTRICAL TAPE.
FOR QUESTIONS, PLEASE CONTACT CLIENT SERVICES
AT: 843.723.8140 OR [email protected]
CONNECT BLACK OR RED (HOT)
HOUSE SUPPLY CIRCUIT WIRE TO:
LUMINAIRE ROUND/BLACK WIRE
(HOT)
CONNECT WHITE (NEUTRAL)
HOUSE SUPPLY CIRCUIT WIRE TO:
LUMINAIRE RIBBED/WHITE WIRE
(NEUTRAL)
CONNECT GREEN INSULATED OR BARE COPPER (GROUND -) HOUSE
SUPPLY CIRCUIT WIRE AND LUMINAIRE BARE STRANDED WIRE
(GROUND -) TO GREEN GROUND SCREW ON CROSSBAR.
